How much Aruba Certified Design Associate Exam costs
- Examination Fees: $180 USD
- Length of Exam: 90 min
- Examination Name: Aruba Certified Design Associate Exam
- No of Questions: 52 Questions
- Types of questions: Performance Based Questions
- Passing Score: 67% or higher
Sample Questions
NewRocket requires a network connection between the main corporate building and a very small building on a campus. This connectivity needs to provide at least 700 Mbps throughput using a wireless solution. An AP will be placed inside each building's lobby near the entrance glass doorway that interconnects the two buildings. The distance between these two doors is approximately 30 feet (10 meters). The connection to the closest wiring closet in each respective building is approximately 280 feet (86 meters) for each AP. The customer needs a solution that will:
- Provide meshing on a dedicated 5 Ghz radio to interconnect the two buildings with an appropriate integrated antennas
- Provide a dedicated 5 Ghz radio for lobby connectivity
Which solution would best meet NewRocket's requirements?
- Aruba AP 535 with Cat 7 cabling
- Aruba AP 500 with MMF cabling
- Aruba AP 374 with MMF cabling
- The Aruba AP 387 with Cat 7 cabling
A network architect is analyzing the current wireless coverage in a new design. Standing 10 feet (approximately 3 meters) away from the AP, the architect tests the wireless signal from the AP. The architect then moves 20 feet (approximately 6 meters) away from the AP and repeats the test. Given that the architect detects no external interference with the signal, by how much would you expect the signal to degrade between the two tests?
- By a factor of 2
- By a factor of 1
- By a factor of 4
- By a factor of 8
A wiring closet with a POE+ switch is 300 feet (100 meters) away from an AP on a building floor. The AP's smart-rate port is connected to a smart-rate port on the switch, which is also capable of 10 Gbps. The cable type is Cat6a STP. What is the maximum speed that the customercan expect from the connected AP?
- 2.5 Gbps
- 10 Gbps
- 1 Gbps
- 5 Gbps
How would a network administrator view the price list of the equipment in one wiring closet?
- Create a Design Group in the site; set the filter in the BOM to the Design Group
- Create a Workspace in the site; set filter in the BOM to the Workspace
- Create a Design Group in the Site; set the filter in the Layers to Design Group
- Create a Wiring Closet in the site; set the filter in the Design Group to Wiring Closet
When a WLAN has to support nomadic devices, a network architect must primarily plan for which component in their design?
- Mobility requirements and usage
- Density of users
- Number of users per location
- Type of users
Which two challenges do802.1ig barcode scanners present to a WLAN design? (Select two.)
- Determining the RF channel bandwidth consumed per Barcode scanner
- Roaming between APs
- Encountering RF interference by devices
- Implementing adequate security measures to ensure PCI compliance
- Providing consistent performance on all available channels
A network architect is creating a new wireless solution for a customer. Wireless coverage is required throughout all four floors of two buildings on the same campus. Dynamic RF capabilities, including AirMatch, are required. Seamless roaming is required within and between the two buildings. Each floor will have approximately 20 APs and 6 external APs are required for connectivity between the two buildings.
Given this information, which Aruba solution would be the most cost-effective while still meeting the customer's requirements?
- An IAP cluster per floor
- A standalone 7008 controller per floor
- Two 7030 mobility controllers in a cluster
- Two 7205 mobility controllers in a cluster
Which must you perform in IRIS to assign a device to a Design Group?
- Right-click the device and select Set Layer Membership
- Drag and drop the device into the Design Group
- Right-click the device and select Set Design Group
- Drag and drop the device into the Site
A network architect is designing a wireless solution for a company that is leasing one floor in a multi-floor building in a downtown area. The customer is concerned about ensuring complete Wi-Fi coverage and pin-pointing RF hazards.
What type of survey should the network architect perform?
- Spectrum clearing
- Active
- Passive
- Virtual
Reference: https://certification-learning.hpe.com/TR/datacard/Exam/HPE6-A66
HP HPE6-A66 Exam Syllabus Topics:
| Section | Objectives |
|---|---|
| Wireless LAN Design Principles | - WLAN design considerations (coverage, capacity, roaming) - RF fundamentals and planning concepts |
| Aruba Portfolio and Solution Overview | - Aruba Edge Services Platform (ESP) overview - Aruba switching and wireless portfolio |
| Solution Design and Best Practices | - Hybrid and cloud-managed network design considerations - Design methodologies and requirements gathering |
| Networking Fundamentals for Design | - OSI model and TCP/IP fundamentals - Enterprise network architecture basics |
| Network Security and Access Design | - ClearPass and authentication design overview - Role-based access control concepts |
| Wired LAN Design | - Campus switching design (AOS-CX concepts) - Redundancy and scalability design principles |
1302 Customer Reviews
Quality and ValueITCertKing Practice Exams are written to the highest standards of technical accuracy, using only certified subject matter experts and published authors for development - no all study materials.
Tested and ApprovedWe are committed to the process of vendor and third party approvals. We believe professionals and executives alike deserve the confidence of quality coverage these authorizations provide.
Easy to PassIf you prepare for the exams using our ITCertKing testing engine, It is easy to succeed for all certifications in the first attempt. You don't have to deal with all dumps or any free torrent / rapidshare all stuff.
Try Before BuyITCertKing offers free demo of each product. You can check out the interface, question quality and usability of our practice exams before you decide to buy.
